How to set up your Level Sensor
- Piotr Budzisz (Unlicensed)
- Maksym Giza (Unlicensed)
Connect to your Level Sensor
First, you will have to connect to your Level Sensor. To do this, you will need a Windows, Mac, Android or iOS device. You will have to connect to the device’s Wi-Fi.
In the article How do I connect to my Reef Factory device you can find more detail about connecting to your device.
Language
Choose your language:
Set Level Sensor
You can choose if the device should alarm you when the liquid level is above or below the limit you’ve set.
Connect Level Sensor to your home network
Now you can connect your Level Sensor to the home network. To do this, please pick your Wi-Fi network from the list and type in the password you’ve set for your router.
If you can’t find your network on the list, it may be necessary to move the Level Sensor closer to the router or vice versa. If your network still won’t show up please check if the router SSID is not hidden or if the router is not turned off.
You may skip this step however, you won’t be able to use any Smart Reef features, check the status of the device and change settings remotely.
You can connect at any time after the first setup if you skip this step.
Setting up your Smart Reef account
Please login to your existing Smart Reef account or create a new one.
You have successfully configured your Level Sensor.