Connect to your pH Meter
First, you will have to connect to your pH Meter. To do this, you will need a Windows, Mac, Android or iOS device. You will have to connect to the device’s Wi-Fi.
In the article How do I connect to my Reef Factory device you can find more detail about connecting to your device.
Language
Choose the language
Set pH Meter limits
To set the desired pH range in your tank please move red sliders to correct values. When the value exceeds the set range (where it’s high or low) it will trigger an alarm. The device will send push and email notifications to the user.
Connect pH Meter to your home network
Now you can connect your pH Meter to your home network. To do this, please pick your Wi-Fi network from the list and type in the password you’ve set for your router.
If you can’t find your network on the list, it may be necessary to move the pH Meter closer to the router or vice versa. If your network still won’t show up please check if the router SSID is not hidden or if the router is not turned off.
You may skip this step however, you won’t be able to use any Smart Reef features, check the status of the device and change settings remotely.
You can connect at any time after the first setup if you skip this step.
Setting up your Smart Reef account
Please login to your existing Smart Reef account or create a new one.
Congratulations!
You have successfully configured your pH Meter.
