Connect to your Level Keeper
Frist, you will have to connect to your Level Keeper. To do this, you will need Windows, Mac, Android or iOS device. You will have to connect to device’s Wi-Fi.
In the article How do I connect to my Reef Factory device you can find more detail about connecting to your device.
Language
Choose the language
Set how often Level Keeper should check water level and refill
Here you can choose the interval of liqud level measure. If the Level Keeper detects during measure that level of liquid is below its maximum setting it will turn on the pump to refill the tank.
If Level Keeper detects that liquid level is below its minimum on both sensors it will start the pump circuit regardless of refill frequency.
Connect Level Keeper to your home network
Now you can connect you Level Keeper to home network. To do this, please pick your Wi-Fi network from the list and type in the password you’ve set for your router.
If you can’t find your network on the list, it may be necessery to move Level Keeper closer to router or vice versa. If your network still won’t show up please check if the router SSID is not hidden or if router is not turned off.
You may skip this step, however you won’t be able to use any Smart Reef features, check status of the device and change settings remotely.
You can connect at any time after first setup if you skip this step.
Setting up your Smart Reef account
Please login to your existing Smart Reef account or create new one.
Congratualtion!
You have successfully configurate your Level Keeper.
