Connect to Thermo Control
First, you will have to connect to your Thermo Control. To do this, you will need a Windows, Mac, Android or iOS device. You will have to connect to the device’s Wi-Fi.
In the article How do I connect to my Reef Factory device you can find more detail about connecting to your device.
Language
Choose the language
Set temperature limits
Please select the upper and lower temperature limit using orange sliders. These will be the points of turning on the heating and cooling circuits. If the temperature will be within the set limits then both circuits will be turned off.
The red sliders are the points that trigger the alarms and sends push and email notifications to the user. They let you know if something is wrong with your aquarium.
Connect Thermo Control to your home network
Now you can connect your Thermo Control to your home network. To do this, please pick your Wi-Fi network from the list and type in the password you’ve set for your router.
If you can’t find your network on the list, it may be necessary to move Thermo Control closer to the router or vice versa. If your network still won’t show up please check if the router SSID is not hidden or if the router is not turned off.
You may skip this step, however, you won’t be able to use any Smart Reef features, check the status of the device and change settings remotely.
You can connect at any time after the first setup if you skip this step.
Setting up your Smart Reef account
Please login to your existing Smart Reef account or create a new one.
Congratulations!
You have successfully configured your Thermal Control.
