To calibrate the aquarium pump please follow these steps:
Make sure the plastic filter is submerged in water.
Put the exit tube comming form coming from the pump to the measuring beaker.
Fully fill the tubes using “
circuit”Status colour Yellow title Fill the
button.circuit Please empty the measuring beaker if any water is present.
Start the calibration process.
When the pump stops please measure the amount that it is in the beaker and put the value in the box.
| Info | ||||||||
|---|---|---|---|---|---|---|---|---|
Check if the pump is calibrated correctly. To do this put the tube to into the empty measuring cup and use “
|
Here is the video about the calibration:
| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Best regards
Reef Factory Team