Connect to Thermo Controlcontrol
First, you will have to connect to your Thermo Control. To do this, you will need a Windows, Mac, Android or iOS device. You will have to connect to the device’s Wi-Fi.
| Info |
|---|
In the article How do I connect to my Reef Factory device you can find more detail about connecting to your device. |
Language
Choose the your language:
...
Set temperature limits
Please select the upper and lower temperature limit using orange sliders. These will be the points of turning on the heating and cooling circuits. If the temperature will be within the set limits then both circuits will be turned off.
...
| Note |
|---|
If you can’t find your network on the list, it may be necessary to move Thermo Control control closer to the router or vice versa. If your network still won’t show up please check if the router SSID is not hidden or if the router is not turned off. |
...
You may skip this step , however, you won’t be able to use any Smart Reef features, check the status of the device and change settings remotely.
You can connect at any time after the first setup if you skip this step.
...
You have successfully configured your Thermal Thermo Control.
...