Smart Reef reef account
If you already have a Smart Reef reef account, you can skip this step and proceed with “Connect to your Power switcher”
Please set up your Smart Reef reef account if you haven’t already before you attempt to configure your Power switcher. Because of safety reasons, it is required to connect the device with the Smart Reef reef system.
To set up the account please go to http://www.reeffactory.com and look for this icon in the top right corner:
...
In the first section please select your home Wi-Fi on the list and type in the password for your router. In the
| Status | ||
|---|---|---|
|
| Note |
|---|
If you can’t find your network on the list, it may be necessary to move the Power switcher closer to the router or vice versa. If your network still won’t show up please check if the router SSID is not hidden or if the router is not turned off. |
...
You have successfully configured your Power switcher. To proceed with the configuration disconnect from your Power switcher and connect with your home network. If the configuration process was successful you should receive a notification email informing you that the device was connected to your Smart Reef reef account. The device should now appear on the list of devices in the Smar Reef system. From now on you can configure the device further through the Smart Reef reef app (in the browser, or on your phone).
...