Connect to your Level Sensorsensor
First, you will have to connect to your Level Sensorsensor. To do this, you will need a Windows, Mac, Android or iOS device. You will have to connect to the device’s Wi-Fi.
...
Choose the language
...
Set Level Sensorsensor
You can choose if the device should alarm you when the liquid level is above or below the limit you’ve set.
...
Connect Level Sensor sensor to your home network
Now you can connect your Level Sensor sensor to the home network. To do this, please pick your Wi-Fi network from the list and type in the password you’ve set for your router.
| Note |
|---|
If you can’t find your network on the list, it may be necessary to move the Level Sensor sensor closer to the router or vice versa. If your network still won’t show up please check if the router SSID is not hidden or if the router is not turned off. |
...
You may skip this step however, you won’t be able to use any Smart Reef reef features, check the status of the device and change settings remotely.
You can connect at any time after the first setup if you skip this step.
...
Setting up your Smart Reef reef account
Please login to your existing Smart Reef reef account or create a new one.
...
You have successfully configured your Level Sensorsensor.
...