Content Comparison

To calibrate the aquarium pump please follow these steps:

Make sure the difference in height between kH Keeper the KH keeper and the reagent container is not greater than 20 cm.
Put the reagent nozzle comming form coming from the pump to the measuring beaker.
Fully fill the tubes using
Status
colour Yellow
title Fill the circuit
button.
Please empty the measuring beaker if any liquid is present.
Start the calibration process.
When the pump stops please measure the amount of liquid that it is in the beaker and put the value in the box.

Info

Check if the pump is calibrated correctly.

To do this put the tube to into the empty measuring cup and use

Status

colour	Blue
title	Test the accuracy

button. The difference should not be greater than 0,05 ml.

Here is the video about the calibration:

Widget Connector

overlay	youtube
_template	com/atlassian/confluence/extra/widgetconnector/templates/youtube.vm
width	100%
url	https://www.youtube.com/watch?v=9PA7xnsDnBk?t=72
height	300px

Best regards
Reef Factory Team

Versions Compared