Steps for TDS meter calibration:
Install you your TDS meter to you your Reverse Osmosis system after Resign the resin filter
Plug device TDS meter to electricity
Configurate device to have it in Smart reefReef:
| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
...
4. Calibration button is on the right bottom in Smart reef Reef in the TDS mater panel.
To calibrate the TDS meter you need to have 000 TDS RO water. If you have no 000 TDS water then the easiest way is to replace resign resin in the filter (you need good quality resign resin – for instance Triton Di). If you replaced resign in your filter then swich switch on the whole Reverse Osmosis filter and wait arround around 10 minutes. Then click the “calibrate button” in Smart reefReef.
Regards,
Reef Factory Team