How to correctly install the measuring cuvette in the Smart TesterIncorrect installation of the measuring cuvette can cause incorrect measurement or even prevent correct measurement with the Smart Tester. An incorrectly installed measuring cuvette can cause: measurement error issues, calibration of the measuring cuvette issues, taking a water sample into the measuring cuvette issues, water leakage from the measuring cuvette issues, adding chemical reagents issues.
The measuring cuvette should be placed in the measuring capsule, and the measuring capsule should be properly installed in the measuring chamber in the Smart Tester. There should be a magnetic stir bae in the measuring cuvette.  Image AddedThe correct and incorrect way to install the measuring cuvette is shown below. | dobrze | źle |
|---|
Upewnij się, że kuweta pomiarowa jest poprawnie osadzona w kapsule pomiarowej. |  Image Removed |  Image Removedkuweta pomiarowa jest krzywo osadzona w kapsule pomiarowej | Upewnij się, że kuweta pomiarowa jest poprawnie osadzona w kapsule pomiarowej. |  Image Removed |  Image Removedkuweta pomiarowa jest krzywo osadzona w kapsule pomiarowej | Upewnij się, że kapsuła pomiarowa jest poprawnie osadzona w komorze pomiarowej Smart Testera. |  Image Removed |  Image Removedkapsuła pomiarowa z kuwetą pomiarową nie została włożona do końca w komorze pomiarowej | Upewnij się, że kapsuła pomiarowa jest poprawnie osadzona w komorze pomiarowej Smart Testera. |  Image Removed |  Image Removedkapsuła pomiarowa z kuwetą pomiarową nie została włożona do końca w komorze pomiarowej Make sure that the measuring cuvette is properly seated in the measuring. Note, the size of the measuring cuvette may vary slightly depending on the series. Therefore, a white stand (shown in the photo) may be added to some measuring cuvettes to properly seat them in the measuring capsule. |  Image Added |  Image Addedmeasuring cuvette is crookedly seated in the measuring capsule | Make sure that the measuring cuvette is properly seated in the measuring. Note, the size of the measuring cuvette may vary slightly depending on the series. Therefore, a white stand (shown in the photo) may be added to some measuring cuvettes to properly seat them in the measuring capsule. |  Image Added |  Image Addedmeasuring cuvette is crookedly seated in the measuring capsule | Make sure that the measuring capsule is properly seated in the measuring chamber of the Smart Tester. |  Image Added |  Image Addedthe measuring capsule with the measuring cuvette has not been inserted all the way into the measuring chamber | Make sure that the measuring capsule is properly seated in the measuring chamber of the Smart Tester. |  Image Added |  Image Addedthe measuring capsule with the measuring cuvette has not been inserted all the way into the measuring chamber |
|