Steps for TDS meter calibration:
Install you your TDS meter to you your Reverse Osmosis system after Resign the resin filter
Plug device TDS meter to electricity
Configurate device to have it in Smart reef: Reef:
| Widget Connector | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
|
https://www.reeffactory.com/?state=productsTDSMeterManual,
4. Calibration button is on the right bottom in Smart
...
Reef in the TDS mater panel.
To calibrate the TDS meter you need to have 000 TDS RO water. If you have no 000 TDS water then the easiest way is to exchange resign replace resin in the filter (you need good quality resign resin – for instance Triton Di). If you replaced resign in your filter then swich switch on the whole Reverse Osmosis filter and wait arround around 10 minutes. Then click the “calibrate button” in Smart reef. When you are 100% sure you did it properly and still is a problem then please contact us: support@reeffactory.com we will help you to solve the problem.Reef.
Regards,
Reef Factory Team