Connect to your Level keeperKeeper
First, you will have to connect to your Level keeperKeeper. To do this, you will need a Windows, Mac, Android or iOS device. You will have to connect to the device’s Wi-Fi.
| Info |
|---|
In the article How do I connect to my Reef Factory device you can find more detail about connecting to your device. |
Language
Choose the your language:
...
Set how often the Level keeper Keeper should check the water level and refill
Here you can choose the interval of liquid level measurement. If the Level keeper Keeper detects during measure that level of liquid is below its maximum setting it will turn on the pump to refill the tank.
| Note |
|---|
If the Level keeper Keeper detects that the liquid level is below its minimum on both sensors it will start the pump circuit regardless of refill frequency. |
...
Now you can connect your Level keeper Keeper to your home network. To do this, please pick your Wi-Fi network from the list and type in the password you’ve set for your router.
| Note |
|---|
If you can’t find your network on the list, it may be necessary to move Level keeper Keeper closer to the router or vice versa. If your network still won’t show up please check if the router SSID is not hidden or if the router is not turned off. |
...
You may skip this step however, you won’t be able to use any Smart reef Reef features, check the status of the device and change settings remotely.
You can connect at any time after the first setup if you skip this step.
...
Setting up your Smart reef Reef account
Please login to your existing Smart reef Reef account or create a new one.
...
You have successfully configured your Level keeperKeeper.
...