Content Comparison

We would like to share with you our new cool feature called Actions.

• General information

Actions is are the feature which that integrates our Smart devices. You can add Actions to different devices and create Actions between them.

Actions integrates integrate the devices added to the same Aquarium, so please make sure that before you start to create Actions you have all the devices assigned to the same aquarium (menu on the left in the Smart Reef panel).

Info
In the example below, we’ve setup set up an aquarium with the name A Sps (new system) and added a couple of our smart devices.

...

In this example, we are going to integrate Dosing Pump with KH Keeperkeeper. Please make sure that your Dosing Pump firmware is up to date.

You can update your device from the Smart Reef panel.

...

.

...

• Where to find the Actions panel?

It’s avalible available in the menu on the left under you your tank, in this case, A Sps (new system).

...

When you click on

Status
title Actions

it takes you to this panel:

...

Please click

Status
colour Blue title add action

Next, the Action creation screen should appear:

...

In this step it is required to choose KH Keeperkeeper:

...

Next step: choose the command from the list:

...

The choice depends on you. If you want to create the Action to add extra liquid when Kh the kH level is below the desired level, then we choose

Status
title KH is below

. When we want to skip part of the next dose then please choose

Status
title KH is above

. In the example, we will show you how both Actions work.

Please choose

Status
title KH is below

Next, enter a value (when the KH Keeper keeper result will be below the specific level of your desired dkH then the system will add an extra dose)

For this example, we chose 7 dkH.

...

Then select the pump for the integration (we can do the same Action several times for different pumps)

...

For In this example, we have chosen the kH pump

...

Next, we need to choose an Action which that will be triggered when the dkH level is bellow below 7.

In this step, you can see all the available Actions. So for the lower dkH level, we can use

Status
title manual dose in ml

or

Status
title manual dose %

from the last dose.

...

We will choose

Status
title manual dose %

from the last dose - This means that when your Kh kH level will be below the 7 Kh kH level, then Dosing pump/s will add an extra dose increased by % based on the last dose.

...

For In this example, we typed 30% so when the kH level is below 7 the system will add an extra30% liquid calculated from the last dose. So if you your last dose (before measurement) was 9 ml then the Dosing pump will add extra 3 ml.

The

Status
title Enter delay

function is the number of minutes the pump will delay. This feature is helpful when you have 2 or more pumps. We don’t want to add all the liquids at one time. So when you add the next pump to the Action please type specific enter a delay here, for instance, 2 minutes. So the second pump will dose 2 minutes after the first one. When there are more than two, then the next pump should be also delayed. See the example below example. You can set the delay in this way:

Pump 1: 0

Pump 2: 2

...

Tip
Congratulations! your first Action is made. Now when your Kh kH level is below the desired level set then the Dosing pump will add the extra quantity.

...

• How to configure Actions when Kh kH level is above specific result?

Again please click

Status
colour Blue title ADD ACTION

Next please choose KH Keeper keeper from the list

...

Please select

Status
title Kh is above

Enter Kh kH level - above this level Dosing pump/s will skip the next dose or part of it. For the example, we typed 8 (KhkH)

...

Next please select the pump you want to integrate for this Action.

Then we choose to skip part of the next dose

...

Then please click OK

...

Tip
Congratulations you have just added the second Action to your integration. Now when the Kh kH result is above the desired level you can set the Dosing pump to skip part of the next dose. For instance when the KH Keeper keeper result will be above 8 as in this example, then part of the next dose from the chosen Dosing pump is skipped (1-100%).

If you want to add the next Dosing pump to this Action then please click

Status
colour Green title ADD TASK

but if you want to add only one then just click

Status
colour Green title SAVE

.

...

Thank you for your time. Those are the first two Actions which that you can use to keep you Kh your kH on your desired level.

New Actions for KH Keeper keeper and other devices will be shared with you in near future.

...