...
Make sure the difference in height between kH Keeper and reagent container is not greater than 20 cm.
Put the reagent nozzle comming form the pump to measuring beaker
Fully fill the tubes using “
circuit”Status colour Yellow title Fill the
buttoncircuit Please empty the measuring beaker if any liquid is present
Start the calibration process
When the pump stops please measure the amount that it is in the beaker and put the value in the box
| Info | ||||||||
|---|---|---|---|---|---|---|---|---|
Check if the pump is calibrated correctly. To do this put the tube to the empty measuring cup and use “
|