...
Language
Choose the language
...
Set dkH range for your tanktemperature limits
Please select the range you want your kH to be within. If masured value will be greater/lower than limits you’ve set you will get a warning.
...
Connect kH Keeper to your home network
Now you can connect you kH Keeper to home network. To do this, please pick your Wi-Fi from the list and type in password you’ve set for you router.
| Note |
|---|
If you can’t find your network on the list, it may be necessery to move kH Keeper closer to router or vice versa. If your network still won’t show up please check if the router SSID is not hidden or if router is not turned off. |
...
You may skip this step, however you won’t be able to use any Smart Reef features, check status of the device and you won’t get any notifications about you kH measures.
You can connect at any time after first setup if you skip this step.
...
Setting up your Smart Reef account
Please login to your existing Smart Reef account or create new one.
...
| Tip |
|---|
Congratualtion! |
You have successfully configurate your kH Keeper.
...
Set lamp working time and maximum brightness
Please select the time lamp start and shuts off by using the sliders. You can also set the lamp’s maximum brightness.
...
...
upper and lower temperature limit using orange sliders. These will be the points of turning on the heating and cooling cricuits. If the temperature will be in the set limits then both circuits will be turned off.
The red sliders are the points which triggers the alarms and sends push and email notifications to the user. They let you know if something is wrong with your aquarium.
...
Connect Thermo Control to your home network
Now you can connect you Reef Flare Thermo Control to home network. To do this, please pick your Wi-Fi network from the list and type in the password you’ve set for you your router.
| Note |
|---|
If you can’t find your network on the list, it may be necessery to move your router Thermo Control closer to the lamprouter or vice versa. If your network still won’t show up please check if the router SSID is not hidden or if router is not turned off. |
...
You may skip this step, however you won’t be able to use any Smart Reef features like checking the , check status of the device and changing change settings remotely.
You can connect at any time after first setup if you skip this step.
...
You have successfully configurate your Reef Flare lampThermal Control.
...