...
| Expand | ||
|---|---|---|
| ||
Check that all connectors are connected together, then check that the hose is not damaged, e.g. frayed or broken. Check if the hose in the pump head is not chafed and if the tubes in the beaker are properly installed (inserted into the plastic connectors). It is very important that the water filter must be completely submerged in the water, and its elements must not protrude above the water. After correctly placing the water filter inside the water, please click the “fill the circuit” button to pump out air bubbles and fill the full circuit with water. |
| Expand | ||
|---|---|---|
| ||
It’s very important to keep close measure over the reagent doses and because we want to you to achive precise results when you are using your kH keeper we’ve choose special motor for our reagent pump. It’s a step motor which is much more precise than a regular one. However they tend to make more noise than regular pumps. |